Home | |
VAN SEATS | |
Captain Chairs | |
Qualitex Empress Captain's Chair

Qualitex Empress Captain's Chair

Name: Qualitex Empress Captain's Chair
Brand: Qualitex
SKU: 011833
Price: 497.00 USD
Availability: InStock
Rating: 4.5 (4 reviews)

Customer Rating: 4 review(s) | write a review

LUXURY DESIGN	PLUSH BOLSTERING
100% HIGH RESILIENCE FOAM	RECLINING BACK

Starting at $497.00
List Price $851.00 (42% Savings)

Material *: Fabric
Vinyl
Leather +$120.00
Seat Option: Seat Heater +$105.00

This outstanding seat heater will provide warm, soothing comfort on the road while also helping to reduce lower back stress. Feel the difference within one minute! The unit comes with a three-position switch and consistent temperature monitoring to prevent overheating.
▪ Separate temperature sensors for the back and bottom, to provide even heating.

119003

Seat Massage +$145.00

Pamper yourself with this luxurious seat massage system. Four inflatable bladders are powered by a pneumatic motor for a one-of-a-kind driving experience. Experience full relief from back fatigue and feel refreshed after a long journey. Great for use with the seat heater, for the ultimate in ergonomic sustenance.
▪ 3 year/36,000 mile warranty.
119004

Manual Lumbar Support +$75.00

An inflatable bladder installed within the seat will give your back muscles all the support they need. Use the attached bulb to adjust the bladder to any preference. Great for combined use with the Rostra seat heater, for the ultimate in ergonomic sustenance.
119001

Power Lumber Support +$145.00

An inflatable bladder installed within the seat will give your back muscles all the support they need. At the touch of a control button which is directly attached to the seat, you can adjust the bladder to any desired preference. Great for combined use with the seat heater, for the ultimate in high-tech ergonomic performance.
▪ Ergonomic control switch
▪ Sound dampening patch to minimize noise
▪ Adjustable seat bladder

119002

6 Way Power Base (Right Hand Controls) +$320.00

Enjoy maximum individualized comfort with this seat base, which will allow your chair to support your frame in six different positions. Three convenient access buttons allow for up/down, forward/back and tilting motions. Customize your favored seating position, or change it as needed.

110995 Right Side Controls
6 Way Power Base (Left Hand Controls) +$320.00

Enjoy maximum individualized comfort with this seat base, which will allow your chair to support your frame in six different positions. Three convenient access buttons allow for up/down, forward/back and tilting motions. Customize your favored seating position, or change it as needed.

110996 Left Hand Controls
7 Spring Seat Frame Bottom +$75.00

The seven springs in this seat frame bottom will provide a solid, firm support base when needed, which also helps to increase seat longevity. Recommended for passengers over 200 lbs.

119010
Fabric *: [V11]Encore Sandstone V11
[V3]Encore Burgundy V3
[V4]Encore Silver V4
[V44]Encore Charcoal V44
[SV5]Encore Ocean SV5
[V6]Encore Black V6
[RL1]Regal Sandstone RL1
[RL2]Regal Walnut RL2
[RL3]Regal Brick RL3
[RL4]Regal Silver RL4
[RL5]Regal Ocean RL5
[P775]Scottsdale Sandstone P775
[T311}Scottsdale Walnut T311
[Y880]Scottsdale Silver Y880
[X161]Scottsdale Charcoal X161
[R721]Scottsdale Ocean R721
[P667]Scottsdale Black P667
Fabric Insert *: [V11]Encore Sandstone V11
[V3]Encore Burgundy V3
[V4]Encore Silver V4
[V44]Encore Charcoal V44
[SV5]Encore Ocean SV5
[V6]Encore Black V6
[RL1]Regal Sandstone RL1
[RL2]Regal Walnut RL2
[RL3]Regal Brick RL3
[RL4]Regal Silver RL4
[RL5]Regal Ocean RL5
[P775]Scottsdale Sandstone P775
[T311]Scottsdale Walnut T311
[Y880]Scottsdale Silver Y880
[X161]Scottsdale Charcoal X161
[R721]Scottsdale Ocean R721
[P667]Scottsdale Black P667
Vinyl *: [V101]Sandalwood V101
[V110]White V110
[V121]Medium Neutral V121
[V202]Moondust V202
[V303]Garnet V303
[V404]Charcoal V404
[V575]Midnight Blue V575
[V606]Black V606
Vinyl Insert *: [V101]Sandalwood V101
[V110]White V110
[V121]Medium Neutral V121
[V202]Moondust V202
[V303]Garnet V303
[V404]Charcoal V404
[V575]Midnight Blue V575
[V606]Black V606
Do you need a base? Let us help you. * What position will this seat be installed to?
Leather *: [L101]Sandalwood L101
[L110]White L110
[L121]Medium Neutral L121
[L202]Moondust L202
[L303]Garnet L303
[L404]Charcoal L404
[L575]Midnight Blue L575
[L606]Black L606
Do you need a base? Let us help you. * In some cases, depending on your year make and model, it will require for you to use an adapter bracket or base in order to install this seat. Please go through the applications to ensure the right fit for your vehicle.
Leather Insert *: [L101]Sandalwood L101
[L110]White L110
[L121]Medium Neutral L121
[L202]Moondust L202
[L303]Garnet L303
[L404]Charcoal L404
[L575]Midnight Blue L575
[L606]Black L606
Van Rear Bases *: Fixed Van Base 5" +$99.00
5" HIGH UNIVERSAL FIXED BASE

This 5" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110205
Fixed Van Base 6" +$99.00

6" HIGH UNIVERSAL FIXED BASE

This 6" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110206

Fixed Van Base 7" +$99.00
7" HIGH UNIVERSAL FIXED BASE

This 7" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110207
Swivel Van Base 7" +$137.00
7" HIGH CENTER BASE

This 7" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110070
Swivel Van Base 9" +$137.00
9" HIGH CENTER BASE

This 9" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

110090
Swivel Van Base 10" +$137.00
10" HIGH CENTER BASE

This 10" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110100
Select Year *
Bases Or Brackets Available * These are the bases or brackets available for your Chevy - GMC Full Size Van.: Your vehicle will not require additional brackets or base.
Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the y

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

No Thank You
1971-77 GMC-CHEVY DRIVER SWIVEL BASE

Use this base to provide a swivel option for your aftermarket seat. +$169.00

Use this base to provide a swivel option for your aftermarket seat.">
1971-77 GMC-CHEVY SWIVEL BASE

This 1971-77 GMC-Chevy swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock GMC-Chevy bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.
▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111619
1971-77 GMC-CHEVY PASSENGER SWIVEL BASE

Use this base to provide a swivel option for your aftermarket seat. +$169.00

Use this base to provide a swivel option for your aftermarket seat.">
1971-77 GMC-CHEVY SWIVEL BASE

This 1971-77 GMC-Chevy swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock GMC-Chevy bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.
▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111620
1971-95 GMC-CHEVY DRIVER POWER BASE RISER

This riser is necessary when ordering a power base. +$124.00

This riser is necessary when ordering a power base.">
1971-95 GMC-CHEVY POWER BASE RISER

The 1971-95 GMC-Chevy power base riser was designed to match a power base to the original height of your seat.   This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111071
1971-95 GMC-CHEVY PASSENGER POWER BASE RISER

This riser is necessary when ordering a power base. +$124.00

This riser is necessary when ordering a power base.">
1971-95 GMC-CHEVY POWER BASE RISER

The 1971-95 GMC-Chevy power base riser was designed to match a power base to the original height of your seat.   This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111072
1978-95 GMC-CHEVY DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
1978-95 GMC-CHEVY SWIVEL BASE

This 1978-95 GMC-Chevy swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock GMC-Chevy bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111623
1978-95 GMC-CHEVY PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
1978-95 GMC-CHEVY SWIVEL BASE

This 1978-95 GMC-Chevy swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock GMC-Chevy bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.
▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111624
1996+ GMC-CHEVY DRIVER AFTERMARKET ADAPTER

This adapter bracket is recommended to install this seat to your van base. +$64.00

This adapter bracket is recommended to install this seat to your van base.">
1996+ GMC-CHEVY AFTERMARKET ADAPTER
The 1996+ GMC-Chevy aftermarket adapter was designed to adapt an aftermarket seat to the factory base of your van. It features an 8x11” inside bolt pattern, a stock GMC-Chevy outside bolt pattern, and an attachment for the seat belt of your chair.

▪For adapting an after-market seat to a factory base
▪Seat belt attachment
▪Inside bolt pattern 8x11”
▪Outside bolt pattern 14 1/4" x 13 1/4”

111612
1996+ GMC-CHEVY PASSENGER AFTERMARKET ADAPTER

This adapter bracket is recommended to install this seat to your van base. +$64.00

This adapter bracket is recommended to install this seat to your van base.">
1996+ GMC-CHEVY AFTERMARKET ADAPTER

The 1996+ GMC-Chevy aftermarket adapter was designed to adapt an aftermarket seat to the factory base of your van. It features an 8x11” inside bolt pattern, a stock GMC-Chevy outside bolt pattern, and an attachment for the seat belt of your chair.   For passenger seats.

▪For adapting an after-market seat to a factory base
▪Seat belt attachment
▪Inside bolt pattern 8x11”
▪Outside bolt pattern 14 1/4" x 13 1/4”

111613
1996+ GMC-CHEVY DRIVER SWIVEL PLATE

Use this plate to provide a swivel option for this van seat. +$199.00

Use this plate to provide a swivel option for this van seat.">
1996+ SWIVEL PLATE

The 96+ GMC-Chevy swivel plate was designed to adapt your aftermarket seat to the factory base of your van. It features 14 ¼ x 13 ¼” top and bottom bolt patterns, and will attach easily with no drilling required.

▪Seat raise 1 5/8”
▪Seat offset 2” facing forward, 3 1/2” facing rear
▪Top bolt pattern 14 1/4” x 13 1/4”
▪Bottom bolt pattern 14 1/4” x 13 1/4”
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111616
1996+ GMC-CHEVY PASSENGER SWIVEL PLATE

Use this plate to provide a swivel option for this van seat. +$199.00

Use this plate to provide a swivel option for this van seat.">
1996+ SWIVEL PLATE

The 96+ GMC-Chevy swivel plate was designed to adapt your aftermarket seat to the factory base of your van. It features 14 ¼ x 13 ¼” top and bottom bolt patterns, and will attach easily with no drilling required. For passenger seats.

▪Seat raise 1 5/8”
▪Seat offset 2” facing forward, 3 1/2” facing rear
▪Top bolt pattern 14 1/4” x 13 1/4”
▪Bottom bolt pattern 14 1/4” x 13 1/4”
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111617
1996+ GMC-CHEVY DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1996+ GMC-CHEVY POWER BASE RISER

The 1996+ GMC-Chevy power base riser was designed to match a power base to the original height of your seat.   This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111618
1996+ GMC-CHEVY PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1996+ GMC-CHEVY POWER BASE RISER

The 1996+ GMC-Chevy power base riser was designed to match a power base to the original height of your seat.   This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111618
Select Full Size Ford Van *
Ford Bases Available *: Your vehicle will not require additional brackets or base.
Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the y

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

No thank you
1969-74 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
69-74 FORD SWIVEL BASE

This 1969-74 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113621
1969-74 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
69-74 FORD SWIVEL BASE

This 1969-74 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113622
1975-91 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
76-91 FORD SWIVEL BASE

This 1976-91 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113640
1975-91 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
76-91 FORD SWIVEL BASE

This 1976-91 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.   For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113641
1992-95 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
92-95 FORD SWIVEL BASE

This 1992-95 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center

113642
1992-95 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
92-95 FORD SWIVEL BASE

This 1992-95 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.   For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center

113643
1996-06 FORD DRIVER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">
96-06 FORD FIXED BASE

This 1996-2006 Ford fixed base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113619
1996-06 FORD PASSENGER FIXED BASE

This base will easily install this seat to your van. +$179.00

This base will easily install this seat to your van.">
96-06 FORD FIXED BASE

This 1996-2006 Ford fixed base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113620
1996-06 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
96-06 FORD SWIVEL BASE

This 1996-2006 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113530
1996-06 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$209.00

Use this base to provide a convenient swivel option for this van seat.">
96-06 FORD SWIVEL BASE

This 1996-2006 Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113531
2007+ FORD DRIVER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">
2007+ FORD FIXED BASE

The 2007+ Ford fixed base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat.

▪8 x 11" top bolt pattern.

▪Stock Ford bottom hole bolt pattern

▪Pyro seat belt attachment

▪Driver and passenger on raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113019

2007+ FORD PASSENGER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">
2007+ FORD FIXED BASE

The 2007+ Ford fixed base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat. For passenger seats.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113022
2007+ FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
2007+ FORD SWIVEL BASE

The 2007+ Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Approved for seats without air bags
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113530
2007+ FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
2007+ FORD SWIVEL BASE

The 2007+ Ford swivel base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. This model comes with a pyro seat belt attachment, with which you can easily attach the seat belt of your seat. For passenger seats.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Approved for seats without air bags
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113532
1975-91 FORD DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1975-91 FORD POWER BASE RISER

The 1975-91 Ford power base riser was designed to match a power base to the original height of your seat.   This power base riser features a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111086
1975-91 FORD PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1975-91 FORD POWER BASE RISER

The 1975-91 Ford power base riser was designed to match a power base to the original height of your seat.   This power base riser features a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111087
1992+ FORD DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$84.00

This riser base is necessary when ordering a power base for your van.">
1992+ FORD POWER BASE RISER

The 1992+ Ford power base riser was designed to match a power base to the original height of your seat.   This power base riser features a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111091
1992+ FORD PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$84.00

This riser base is necessary when ordering a power base for your van.">
1992+ FORD POWER BASE RISER

The 1992+ Ford power base riser was designed to match a power base to the original height of your seat.   This power base riser features a stock Ford bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111092
Select Ram Year *
Bases Or Brackets Available *: Your vehicle will not require additional brackets or base.
Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the y

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

1994+ DODGE DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1994+ DODGE POWER BASE RISER

The 1994+ Dodge power base riser was designed to match a power base to the original height of your seat. This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111081
1994+ DODGE PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1994+ DODGE POWER BASE RISER

The 1994+ Dodge power base riser was designed to match a power base to the original height of your seat. This power base riser features a universal bottom hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111082

Your Price $497.00

Add to Wishlist

QUALITEX EMPRESS CAPTAIN’S CHAIR

AVAILABLE IN FABRIC/VINYL/GENUINE LEATHER

Specifications

All van chairs are made to order to specification
Heavy duty tubular steel frame
Both seat armrests included in shipping, with the inside armrest already installed
100% high resilience foam package
Multi-position reclining and fold forward back
Constructed for long range support
7-inch slide tracks
4 No-sag springs placed front to back
Stain-resistant coverings
Choice of one or two seat arms
Seating Systems tested and certified to meet or exceed DOT Safety Standard FMVSS#207 for van chairs, per sections S4.2 and S4.3
All materials tested and certified to meet or exceed FMVSS #302 Safety Standards for van chairs, per section S4.2 and S4.3.
One-year manufacturer's warranty

Product Description

The Empress class of van chairs offers truly regal comfort and style in one supreme package. This luxury brand of van chairs features plush seating and headrests you can relax in with ease, little realizing your body is being firmly sustained at the same time. Additionally, the Empress class of van chairs is uniquely constructed with 100% high-resilience foam, which never bends or collapses so that it can offer full support for years to come. The Empress will turn any van into a royal chariot, floating effortlessly to your next exciting destination! Both seat armrests are included in shipping; the inside armrest already comes installed to the seat, for your convenience. Note: Ford ’96 vans or newer will require a base with a pyro adjuster bracket to install, while Chevy ’96 and newer will require an Aftermarket seat adapter. Sprinter vans will require a base with a pyro adjuster bracket to install.

011833

California Residents: WARNING, Proposition 65 Notice

Check items to add to the cart or select all

Captain Chairs
96 - 06 Ford Fixed Base
$199.00

Captain Chairs
96 + GMC - Chevy Aftermarket Seat Adapter
$64.00

Use spaces to separate tags. Use single quotes (') for phrases.

Great People to Work With! Review by Chris A

Price

Value

Quality

I ordered a full set of Empress High Back seats for my 2009 Dodge Ram Diesel truck. I was hesitant to purchase because I couldn't find a lot of reviews or further info. The seats came in and were absolutely wonderful. I set to installing and the instructions were easy - I had no issues with installation. (Posted on 9/27/17)
Recieved my order a week early! Review by Richard L

Price

Value

Quality

My new captains chairs came early. They look and feel very comfy. I ordered the drivers seat with the better padding. Honestly I could tell them apart.

I didn't realize it but my old pedestals wobble. So I called today to place an order. Clara was very helpful. I could tell right off that she knows the products you sell. She described everything to me and answered all my questions. I was very happy with the whole process.
I ordered two pedestals and two new seat belts.
Thank you,
Richard Luetke (Posted on 9/27/17)
Great selection Review by Coby G

Price

Value

Quality

I was in need of changing my captains chairs in my RV. I called and spoke with Clara. She did a great job and was able to show me several that would fit for my application. I was very surprised with the amount of chairs they offered. I'm planning a trip to look at their facility and will review again after. (Posted on 9/27/17)
these guys are crazy helpful Review by johnny

Price

Value

Quality

I ordered captain chairs, dinette, couch and chair. Absolutely amazed, at the quality, I took a huge leap of trust, to order without actually seeing or touching the product , online!! Not to mention I live in Canada!! Anna walked me through the whole process very proffessionaly and politely,

Putting up with my annoying , endless questions!! :) Your Awesome!!!! I still haven't finished my reno's on my 97 winnebago adventurer!! I will submit a video or pictures of before and after if I am allowed!!!!! Quality at a FAIR price!!! Happy Canuck!!! (Posted on 9/26/17)

Write Your Own Review

You're reviewing: Qualitex Empress Captain's Chair

How do you rate this product? *

*Nickname
*Summary of Your Review
*Review
* This is a required field.

	1 star	2 stars	3 stars	4 stars	5 stars
Price
Value
Quality

Price
Value
Quality

Price
Value
Quality

Price
Value
Quality

Price
Value
Quality