De Leon II RV Captain Seats

Customer Rating: 1 review(s) | write a review

LUXURY DESIGN	PLUSH BOLSTERING
SUMPTUOUS HEADREST	ACCENTED PIPING TRIM

Starting at $439.00
List Price $549.00 (20% Savings)

Material *: Fabric
Ultimate Leather +$150.00
Seat Option: High Resilience Foam Upgrade +$90.00

Upgrade your seat with the supreme buoyance and resilience of high resistance foam. This foam package will cushion you, even as it provides full ergonomic support.

010000
Seat Heater +$105.00

This outstanding seat heater will provide warm, soothing comfort on the road while also helping to reduce lower back stress. Feel the difference within one minute! The unit comes with a three-position switch and consistent temperature monitoring to prevent overheating. 

▪ Separate temperature sensors for the back and bottom, to provide even heating.

119003
Seat Massage +$145.00

Pamper yourself with this luxurious seat massage system. Four inflatable bladders are powered by a pneumatic motor for a one-of-a-kind driving experience. Experience full relief from back fatigue and feel refreshed after a long journey. Great for use with the seat heater, for the ultimate in ergonomic sustenance.
▪3 year/36,000 mile warranty.

119004

Manual Lumbar Support +$75.00

An inflatable bladder installed within the seat will give your back muscles all the support they need. Use the attached bulb to adjust the bladder to any preference. Great for combined use with the Rostra seat heater, for the ultimate in ergonomic sustenance.

119001

Power Lumber Support +$145.00

An inflatable bladder installed within the seat will give your back muscles all the support they need. At the touch of a control button which is directly attached to the seat, you can adjust the bladder to any desired preference. Great for combined use with the seat heater, for the ultimate in high-tech ergonomic performance.
▪ Ergonomic control switch
▪ Sound dampening patch to minimize noise
▪ Adjustable seat bladder
119002

6 Way Power Base (Right Hand Controls) +$320.00

Enjoy maximum individualized comfort with this seat base, which will allow your chair to support your frame in six different positions. Three convenient access buttons allow for up/down, forward/back and tilting motions. Customize your favored seating position, or change it as needed.

110995 Right Side Controls
6 Way Power Base (Left Hand Controls) +$320.00

Enjoy maximum individualized comfort with this seat base, which will allow your chair to support your frame in six different positions. Three convenient access buttons allow for up/down, forward/back and tilting motions. Customize your favored seating position, or change it as needed.

110996 Left Hand Controls

Power Leg Rest +$275.00

This leg rest, for use in passenger seats, will provide full leg support at the touch of a button.

001237

Power Recline +$325.00

For instant recline in any desired position, at the touch of a button.
001236

7 Spring Seat Frame Bottom +$75.00

The seven springs in this seat frame bottom will provide a solid, firm support base when needed, which also helps to increase seat longevity. Recommended for passengers over 200 lbs.

119010

Flexsteel Base Handle +$9.00

This accessory replaces the cable included in swivel bases, so that you can attach your new barrel chair to your existing Flexsteel swivel base.

111102
Fabric *: [V11]Encore Sandstone V11
[V2]Encore Walnut V2
[V3]Encore Burgundy V3
[V4]Encore Silver V4
[V44]Encore Charcoal V44
[SV5]Encore Ocean SV5
[V6]Encore Black V6
[RL1]Regal Sandstone RL1
[RL2]Regal Walnut RL2
[RL3]Regal Brick RL3
[RL4]Regal Silver RL4
[RL5]Regal Ocean RL5
[P775]Scottsdale Sandstone P775
[T311]Scottsdale Walnut T311
[Y880]Scottsdale Silver Y880
[X161]Scottsdale Charcoal X161
[R721]Scottsdale Ocean R721
[P667]Scottsdale Black P667
Fabric Insert *: [V11]Encore Sandstone V11
[V2]Encore Walnut V2
[V3]Encore Burgundy V3
[V4]Encore Silver V4
[V44]Encore Charcoal V44
[SV5]Encore Ocean SV5
[V6]Encore Black V6
[RL1]Regal Sandstone RL1
[RL2]Regal Walnut RL2
[RL3]Regal Brick RL3
[RL4]Regal Silver RL4
[RL5]Regal Ocean RL5
[P775]Scottsdale Sandstone P775
[T311]Scottsdale Walnut T311
[Y880]Scottsdale Silver Y880
[X161]Scottsdale Charcoal X161
[R721]Scottsdale Ocean R721
[P667]Scottsdale Black P667
Do you need a base? Let us help you. *: No Thank You
Yes please
Ultimate Leather *: [IL113]Bisque IL113
[IL101]Almond IL101
[IL102]Cream IL102
[IL103]Lt. Antelope IL103
[IL115]Moleskin IL115
[IL114]Briarwood IL114
[IL105]Beachwood IL105
[IL117]Chocolate IL117
[IL104]Mocha IL104
[IL118]Decaf IL118
[IL116]Sea Turtle IL116
[IL107]Pine Mtn. IL107
[IL106]Chianti IL106
[IL108]Denim IL108
[IL109]Marine IL109
[IL110]Ash Gray IL110
[IL111]Charcoal IL111
[IL112]Black IL112
Please select your type of RV. *: CLASS A MOTOR HOME

The Class A Motor Home features a bus-like construction with a vertical front end and large windows, affording plenty of space within.
CLASS C MOTOR HOME

The Class C Motor Home features a truck or van-like front end with a cab-over, that provides an extra sleeping area.
Ultimate Leather Insert *: [IL113]Bisque IL113
[IL101]Almond IL101
[IL102]Cream IL102
[IL103]Lt. Antelope IL103
[IL115]Moleskin IL115
[IL114]Briarwood IL114
[IL105]Beachwood IL105
[IL117]Chocolate IL117
[IL104]Mocha IL104
[IL118]Decaf IL118
[IL116]Sea Turtle IL116
[IL107]Pine Mtn. IL107
[IL106]Chianti IL106
[IL108]Denim IL108
[IL109]Marine IL109
[IL110]Ash Gray IL110
[IL111]Charcoal IL111
[IL112]Black IL112
What position will this seat be installed to? *
Will your seat be using a power base? *
Please Select A Base *: 7" SWIVEL BASE

This base will be used for seats with a standard 8"x11" bolt pattern. +$140.00

This base will be used for seats with a standard 8"x11" bolt pattern.">
7" Swivel BaseSpecifications
8X11” top bolt pattern
8x8” bottom plate
3” center post
7X7” bottom bolt patterns
Seat belt bar

Product Description
The Class A Swivel Base is designed to bolt on easily to any RV or van seat. It has an 8x11” top bolt pattern. This swivel base meets or exceeds FMVSS #207 safety standards for RV and van swivel bases.

110070
9" SWIVEL BASE

This base will be used for seats with a standard 8"x11" bolt pattern. +$140.00

This base will be used for seats with a standard 8"x11" bolt pattern.">
9" Swivel Base Specifications
8X11” top bolt pattern
8x8” bottom plate
3” center post
7X7” bottom bolt patterns
Seat belt bar

Product Description
The Class A Swivel Base is designed to bolt on easily to any RV or van seat. It has an 8x11” top bolt pattern. This swivel base meets or exceeds FMVSS #207 safety standards for RV and van swivel bases.

110090
10" SWIVEL BASE

This base will be used for seats with a standard 8"x11" bolt pattern. +$140.00

This base will be used for seats with a standard 8"x11" bolt pattern.">
10" Swivel Base Specifications
8X11” top bolt pattern
8x8” bottom plate
3” center post
7X7” bottom bolt patterns
Seat belt bar

Product Description
The Class A Swivel Base is designed to bolt on easily to any RV or van seat. It has an 8x11” top bolt pattern. This swivel base meets or exceeds FMVSS #207 safety standards for RV and van swivel bases.

110100
UNDER FLOOR REINFORCEMENT KIT

(4) 2"x5" reinforcements, with grade 5 nut and bolt included. +$26.00

(4) 2"x5" reinforcements, with grade 5 nut and bolt included.">
UNDER FLOOR REINFORCEMENT KIT
Specifications
Under floor reinforcement plate
(4) 2"x5" reinforcements
Choice of 3 mount points
Includes grade 5 bolt and nut
Tested and certified to meet or exceed DOT Safety Standard FMVSS #207 for backing plates, per sections S4.2 and S4.3

Product Description
This under floor reinforcement plate is a perfect reinforcement plate for seat belts or L brackets. 3 mount points are included for access in tight locations. The plate also has a large 2"x5" reinforcement, with grade 5 nut and bolt included.

150051
Van Rear Bases *: Fixed Van Base 5" +$99.00

5" HIGH UNIVERSAL FIXED BASE

This 5" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110205

Fixed Van Base 6" +$99.00

6" HIGH UNIVERSAL FIXED BASE

This 6" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110206

Fixed Van Base 7" +$99.00
7" HIGH UNIVERSAL FIXED BASE

This 7" high universal fixed base was designed to fit your aftermarket seat to your van with a 16x16" top plate size.

▪16" x 16" top plate size
▪Not predrilled
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110207

Swivel Van Base 7" +$137.00

7" HIGH CENTER BASE

This 7" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

110070

Swivel Van Base 9" +$137.00

9" HIGH CENTER BASE

This 9" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110090

Swivel Van Base 10" +$137.00

10" HIGH CENTER BASE

This 10" high center base was designed to fit your aftermarket seat to your van with an 8x11” top bolt pattern, combined with a 7x7" hole bolt pattern that will bolt directly to the factory bolt holes on your floor, with no drilling required. Seat belt bar is included.

▪Top Bolt Pattern 8x11”
▪7" x 7" bottom bolt pattern
▪Seat belt bar
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
110100
What chasis is your motor home? * In some cases, depending on your year make and model, it will require for you to use an adapter bracket or base in order to install this seat. Please go through the applications to ensure the right fit for your vehicle.
Select Year *
Swivel Riser *: SWIVEL BASE RISER

This base will be used when ordering a seat with a 6-way power base option. +$187.00

This base will be used when ordering a seat with a 6-way power base option.">
Swivel and Riser
for power base all in one.
Set in an upward angle towards the front with a 5 1/2" center height.
Top bolt pattern is a match to power unit.
Bottom bolt patterns 8x8" and
6 1/4 x 9 1/4"
111194
Bases Or Brackets Available * These are the bases or brackets available for your Chevy - GMC Full Size Van.: No Thank You
Your vehicle will not require additional brackets or base.

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

1971-77 GMC-CHEVY DRIVER SWIVEL BASE

Use this base to provide a swivel option for your aftermarket seat. +$169.00

Use this base to provide a swivel option for your aftermarket seat.">
1971-77 GMC-CHEVY SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1971-77 GMC-Chevy swivel base, which requires no drilling. The base features an 8x11" top bolt pattern, combined with a stock GMC-Chevy bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV floor.
▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111619
1971-77 GMC-CHEVY PASSENGER SWIVEL BASE

Use this base to provide a swivel option for your aftermarket seat. +$169.00

Use this base to provide a swivel option for your aftermarket seat.">
1971-77 GMC-CHEVY SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1971-77 GMC-Chevy swivel base, which requires no drilling. The base features an 8x11" top bolt pattern, combined with a stock GMC-Chevy bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV floor. For passenger seats.
▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111620
1971-95 GMC-CHEVY DRIVER POWER BASE RISER

This riser is necessary when ordering a power base. +$124.00

This riser is necessary when ordering a power base.">
1971-95 GMC-CHEVY POWER BASE RISER

You can match a power base to the original height of your RV seat with this 1971-95 GMC-Chevy power base riser, with no drilling required.. This power base riser will bolt directly to the factory bolt holes on the floor of your Class C RV motorhome, thanks to a universal bottom hole bolt pattern.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111071
1971-95 GMC-CHEVY PASSENGER POWER BASE RISER

This riser is necessary when ordering a power base. +$124.00

This riser is necessary when ordering a power base.">
1971-95 GMC-CHEVY POWER BASE RISER

You can match a power base to the original height of your RV seat with this 1971-95 GMC-Chevy power base riser, with no drilling required. This power base riser will bolt directly to the factory bolt holes on the floor of your Class C RV motorhome, thanks to a universal bottom hole bolt pattern. For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111072
1978-95 GMC-CHEVY DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
1978-95 GMC-CHEVY SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1978-95 GMC-Chevy swivel base, with no drilling required. The base features an 8x11" top bolt pattern, combined with a stock GMC-Chevy bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV floor.

▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111623
1978-95 GMC-CHEVY PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
1978-95 GMC-CHEVY SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1978-95 GMC-Chevy swivel base, with no drilling required. The base features an 8x11" top bolt pattern, combined with a stock GMC-Chevy bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock GM bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111624
1996+ GMC-CHEVY DRIVER AFTERMARKET ADAPTER

This adapter bracket is recommended to install this seat to your van base. +$64.00

This adapter bracket is recommended to install this seat to your van base.">
1996+ GMC-CHEVY AFTERMARKET ADAPTER

You can adapt an aftermarket RV seat to the factory base of your Class C RV motorhome with this 1996+ GMC-Chevy aftermarket adapter. This adapter contains a stock GMC-Chevy outside bolt pattern, an 8x11" inside bolt pattern, and a seat belt attachment.

▪For adapting an after-market seat to a factory base
▪Seat belt attachment
▪Inside bolt pattern 8x11”
▪Outside bolt pattern 14 1/4" x 13 1/4”

111612
1996+ GMC-CHEVY PASSENGER AFTERMARKET ADAPTER

This adapter bracket is recommended to install this seat to your van base. +$64.00

This adapter bracket is recommended to install this seat to your van base.">
1996+ GMC-CHEVY AFTERMARKET ADAPTER

You can adapt an aftermarket RV seat to the factory base of your Class C RV motorhome with this 1996+ GMC-Chevy aftermarket adapter. This adapter contains a stock GMC-Chevy outside bolt pattern, an 8x11" inside bolt pattern, and a seat belt attachment. For passenger seats.

▪For adapting an after-market seat to a factory base
▪Seat belt attachment
▪Inside bolt pattern 8x11”
▪Outside bolt pattern 14 1/4" x 13 1/4”

111613
1996+ GMC-CHEVY DRIVER SWIVEL PLATE

Use this plate to provide a swivel option for this van seat. +$199.00

Use this plate to provide a swivel option for this van seat.">
1996+ SWIVEL PLATE

Adapt an aftermarket RV seat to the factory base of your Class C RV motorhome with this 96+ GMC-Chevy swivel plate. This plate attaches easily with no drilling, by using 14 ¼ x 13 ¼” top and bottom bolt patterns.

▪Seat raise 1 5/8”
▪Seat offset 2” facing forward, 3 1/2” facing rear
▪Top bolt pattern 14 1/4” x 13 1/4”
▪Bottom bolt pattern 14 1/4” x 13 1/4”
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

111616

1996+ GMC-CHEVY PASSENGER SWIVEL PLATE

Use this plate to provide a swivel option for this van seat. +$199.00

Use this plate to provide a swivel option for this van seat.">

1996+ SWIVEL PLATE

Adapt an aftermarket RV seat to the factory base of your Class C RV motorhome with this 96+ GMC-Chevy swivel plate. This plate attaches easily with no drilling, by using 14 ¼ x 13 ¼” top and bottom bolt patterns. For passenger seats.

▪Seat raise 1 5/8”
▪Seat offset 2” facing forward, 3 1/2” facing rear
▪Top bolt pattern 14 1/4” x 13 1/4”
▪Bottom bolt pattern 14 1/4” x 13 1/4”
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111617

1996+ GMC-CHEVY DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">

1996+ GMC-CHEVY POWER BASE RISER

Match a power base to the original height of your RV seat with this 1996+ GMC-Chevy power base riser. The universal bottom hole bolt pattern of this power base riser will bolt directly to the factory bolt holes of your Class C RV motorhome floor, with no drilling required.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111073

1996+ GMC-CHEVY PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">

1996+ GMC-CHEVY POWER BASE RISER

Match a power base to the original height of your RV seat with this 1996+ GMC-Chevy power base riser. The universal bottom hole bolt pattern of this power base riser will bolt directly to the factory bolt holes of your Class C RV motorhome floor, with no drilling required. For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111074
Select Full Size Ford Van *
Ford Bases Available *: No thank you
Your vehicle will not require additional brackets or base.

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

1969-74 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

69-74 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV with this 1969-74 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113621
1969-74 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

69-74 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV with this 1969-74 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor.  For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113622
1976-91 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

76-91 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1976-91 Ford swivel base, no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113640
1976-91 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

76-91 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1976-91 Ford swivel base, no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113641
1992-95 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

92-95 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1992-95 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the bolt holes on your Class C RV motorhome floor.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
113642
1992-95 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">

92-95 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1992-95 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the bolt holes on your Class C RV motorhome floor.   For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪6” high at center
113643
1996-06 FORD DRIVER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">

96-06 FORD FIXED BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1996-06 Ford fixed base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113619
1996-06 FORD PASSENGER FIXED BASE

This base will easily install this seat to your van. +$179.00

This base will easily install this seat to your van.">
96-06 FORD FIXED BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1996-06 Ford fixed base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113620
1996-06 FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
96-06 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1996-06 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113530
1996-06 FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$209.00

Use this base to provide a convenient swivel option for this van seat.">
96-06 FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1996-06 Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment. For passenger seats.

▪8X11” top bolt pattern
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Raised bottom plate w/driver
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113531
2007+ FORD DRIVER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">
2007+ FORD FIXED BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2007+ Ford fixed base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment.

▪8 x 11" top bolt pattern.

▪Stock Ford bottom hole bolt pattern

▪Pyro seat belt attachment

▪Driver and passenger on raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

113019
2007+ FORD PASSENGER FIXED BASE

This base will easily install this seat to your van. +$199.00

This base will easily install this seat to your van.">
2007+ FORD FIXED BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2007+ Ford fixed base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment. For passenger seats.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113022
2007+ FORD DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
2007+ FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2007+ Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Approved for seats without air bags
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113530
2007+ FORD PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$229.00

Use this base to provide a convenient swivel option for this van seat.">
2007+ FORD SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2007+ Ford swivel base, with no drilling required. This base features an 8x11" top bolt pattern, combined with a stock Ford bottom bolt pattern that bolts directly to the factory bolt holes on your Class C RV motorhome floor. You can also easily attach the seat belt of your RV seat using the pyro seat belt attachment. For passenger seats.

▪8 x 11" top bolt pattern.
▪Stock Ford bottom hole bolt pattern
▪Pyro seat belt attachment
▪Driver and passenger on raised bottom plate
▪Approved for seats without air bags
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
113532
1975-91 FORD DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">

1975-91 FORD POWER BASE RISER

Match a power base to the original height of your RV seat with this 1975-91 Ford power base riser, with no drilling required. The stock Ford bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111086
1975-91 FORD PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1975-91 FORD POWER BASE RISER

Match a power base to the original height of your RV seat with this 1975-91 Ford power base riser, with no drilling required. The stock Ford bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111087
1992+ FORD DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$84.00

This riser base is necessary when ordering a power base for your van.">
1992+ FORD POWER BASE RISER

Match a power base to the original height of your RV seat with this 1992+ Ford power base riser, with no drilling required. The stock Ford bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111091
1992+ FORD PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$84.00

This riser base is necessary when ordering a power base for your van.">
1992+ FORD POWER BASE RISER

Match a power base to the original height of your RV seat with this 1992+ Ford power base riser, with no drilling required. The stock Ford bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Raises the power unit to match the original seat height
▪Stock Ford bottom hole bolt pattern
▪5 1/2" front height, 3" rear height
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111092
Select Ram Year *
Bases Or Brackets Available *: Your vehicle will not require additional brackets or base.

Your vehicle will not require additional brackets or a base, thanks to the universal plate included with this seat. This universal plate features set bolt patterns which will match the year, make, and model of your vehicle. Additionally, this base was manufactured to be drilled, if additional bolt holes are necessary. A standard 8x11" bolt pattern is also included.

1971-77 DODGE DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
71-77 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1971-77 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3

112621
1971-77 DODGE PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
71-77 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1971-77 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112622
1978-93 DODGE DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
78-93 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1978-93 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112627
1978-93 DODGE PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
78-93 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1978-93 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112628
1994 DODGE DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
94 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1994 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112629
1994 DODGE PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
94 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1994 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112630
1995-99 DODGE DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
95-99 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1995-99 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪3" raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112633
1995-99 DODGE PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
95-99 DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 1995-99 Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪3" raised bottom plate
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112630
2000+ DODGE DRIVER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
2000+ DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2000+ Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112629
2000+ DODGE PASSENGER SWIVEL BASE

Use this base to provide a convenient swivel option for this van seat. +$169.00

Use this base to provide a convenient swivel option for this van seat.">
2000+ DODGE SWIVEL BASE

Fit an aftermarket RV seat to your Class C RV motorhome with this 2000+ Dodge swivel base, with no drilling required. This base features an 8x11" top bolt pattern that combines with a stock Dodge bottom bolt pattern to bolt directly to the factory bolt holes on your Class C RV motorhome floor. For passenger seats.

▪Top Bolt Pattern 8x11”
▪Stock Dodge bottom bolt pattern
▪6” high at center
▪Seat bases tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
112630
1994+ DODGE DRIVER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1994+ DODGE POWER BASE RISER

Match a power base to the original height of your RV seat with this 1994+ Dodge power base, with no drilling required. The universal bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111081
1994+ DODGE PASSENGER POWER BASE RISER

This riser base is necessary when ordering a power base for your van. +$124.00

This riser base is necessary when ordering a power base for your van.">
1994+ DODGE POWER BASE RISER

Match a power base to the original height of your RV seat with this 1994+ Dodge power base, with no drilling required. The universal bottom bolt pattern of this riser will bolt directly to the factory bolt holes on your Class C RV motorhome floor.   For passenger seats.

▪Raises the power unit to match the original seat height
▪Universal bottom hole bolt pattern
▪Seat base risers tested and certified to meet FMVSS #207 safety standards per sections S4.2 and S4.3
111082

Your Price $439.00

Add to Wishlist

De Leon Captain Chairs

CAPTAIN CHAIR FEATURES

▪ Plush Bolstering.
▪ Multi-position Reclining Back.
▪ No-sag Spring and Foam Suspension.
▪ Slide Tracks Included.
▪ Rear Seat Pocket.
▪ Skirting.
▪ Heavy Duty Tubular Steel Frame.
▪ Meets FMVSS#302 Safety Standards for RV Captain Seats.

DIMENSIONS

PRODUCT DESCRIPTION

The DeLeon RV captain seats are the equally extravagant counterpart to the wildly popular DeLeon model. As if illustrating that you can improve on perfection, this version comes with a two-tone cover and accented piping trim, which gives it a smartly distinctive look. This RV captain seat coordinates well with the Hampton sofa bed, Savannah barrel chair and Livingstone dinette. But whether alone or matched with other top-line RV furniture accessories, the DeLeon will enhance your driving experience to the fullest.

010017

Use spaces to separate tags. Use single quotes (') for phrases.

Great Service! Review by King Shaw

Price
Value
Quality

Bought a driver's deLeon captain chair. Thanks!
By the way, love the seats! (Posted on 9/27/17)

Write Your Own Review

You're reviewing: De Leon II RV Captain Seats

How do you rate this product? *

	1 star	2 stars	3 stars	4 stars	5 stars
Price
Value
Quality

*Nickname
*Summary of Your Review
*Review
* This is a required field.