A 40/20/40 seat is a split bench seat divided into three sections across the cab: the driver's side takes about 40 percent of the width, the middle section about 20 percent, and the passenger side about 40 percent.
That is the short answer to what is a 40/20/40 seat, and it is also the split bench seat meaning in plain terms: a bench divided into working sections instead of one solid piece. Each section operates on its own, which is why the layout is so common in full-size pickups. Below, what each part does, how it differs from a 60/40 and a full bench, and what to check if you are replacing one.
What Does 40/20/40 Mean in a Truck Seat?
The split describes how the seat is divided from side to side, not front to back.
|
|
|
|
|
That middle 20 percent is the whole point of the layout. A pair of bucket seats gives you a console but only two seats. A full bench gives you three seats but no console. A 40/20/40 lets you switch between the two in a few seconds.
On our models, the backrests also fold forward with a lever, which helps when you are reaching behind the seat in a tight cab.
40/20/40 vs 60/40 Split Bench Seats
| 40/20/40 | 60/40 | |
| Sections | Three | Two |
| Middle seat | A dedicated narrow seat that folds out of the console | Part of the wider section, with no separate backrest |
| Console | Built into the middle section | None built in |
| Storage and cupholders | In the folded-down middle section | Not included |
| Best for | Daily drivers that need a console most days and a third seat sometimes | Carrying three people, or folding one side flat for long items |
Both layouts seat three. The difference is what happens when the third person is not there. A 60/40 gives you a flat seat back to lean on, while a 40/20/40 gives you a working console.
40/20/40 vs Full Bench vs Bucket Seats
A full bench is one continuous seat with a single backrest. It seats three, has no console and nothing reclines separately.
Bucket seats and captain chairs are individual seats with a console between them. They are more comfortable for two people and remove the third seat completely.
A 40/20/40 sits between the two. If you are weighing up bench seat vs bucket seat for your own truck, our truck bench seat, bucket seat and captain chair guide covers the full comparison.
What Is a Jump Seat (or Buddy Seat)?
A jump seat is a small, occasional-use seat that folds away when it is not needed. In a truck front seat, the middle section of a 40/20/40 does the same job: it folds up from the console to carry a third passenger for shorter trips, then folds back down.
Features of a 40/20/40 Bench Seat
Using our own models as the example, here is what the layout typically includes:
|
|
|
|
|
|
|
|
|
|
|
Construction matters as much as features. Our seats use 100% multi-density high resilience foam, a heavy duty tubular steel frame with a powder coating on exposed metal, and four no-sag springs front to back. The covers are graded 4 for colorfastness against sun fading.
Benefits and Drawbacks of 40/20/40 Seats
|
|
Can You Swap Your Truck Seats? Replacement Basics
Yes, in most cases, and the bracket is what makes it possible.
Truck bench seat replacement runs through the bracket: the new seat mounts on brackets matched to your truck's floor points, so you choose the seat and the bracket together. Brackets are listed by make, model year and cab style, and we carry them for Chevy and GMC, Ford and Dodge full-size trucks.
Two things to check before ordering. First, cab size: high back designs are recommended for trucks with expanded cabs, while low back designs suit single cabs. Second, how your seat belts are mounted, since belts fixed to the seat and belts fixed to the vehicle are not interchangeable.
|
Where to Find 40/20/40 Replacement Seats
Start with our 40/20/40 truck bench seats range, then narrow by cab size using the high back or low back collections. The American Classic 40-20-40 is a good example of the layout, with the console, flip-up middle seat and storage all in one unit. You can also see everything together on the all truck bench seats page.
Need Help Choosing?
If you know the layout you want but not the bracket, call our team on 1-800-454-1801 with your year, make, model and cab style, and we will confirm what fits before you order.
|
|
|
|
Frequently Asked Questions
|
What does 40/20/40 stand for? It describes how a split bench seat is divided across the cab: about 40 percent for the driver's seat, 20 percent for the middle section and 40 percent for the passenger seat. Each section works independently, and the middle one doubles as a console or a third seat. |
|
Is 40/20/40 the same as 60/40? No. A 60/40 has two sections, with the middle passenger sharing the wider one. A 40/20/40 has three sections, so the middle is a dedicated narrow seat that folds down into a console with storage and cupholders. Both layouts seat three people. |
|
Can the center seat fold into a console? Yes, that is the design. The middle section folds down to form a console with cupholders and a storage area, and there is storage underneath it as well. Fold it back up and the middle becomes a seat for a third passenger on shorter trips. |
|
Which trucks use a 40/20/40 seat? Many full-size pickups across brands have offered this layout, though it often depends on the trim and options package rather than the model alone. Two identical-looking trucks can have different seats, so check your owner's manual or build sheet to confirm what yours has. |
